{
 "currentVersion": 11.1,
 "cimVersion": "3.1.0",
 "serviceDescription": "WSDOT sets level of service (LOS) standards for state highways and ferry routes of statewide significance (HSS) based on RCW 47.06.140(2). Regional transportation planning organizations (RTPOs) and WSDOT jointly develop and RTPOs establish LOS standards for regionally significant state highways and ferry routes (non-HSS) based on RCW 47.80.030(1)(c). LOS is based on peak-hour except where noted.\n\nLevel of Service Standard is used by planners to determine the effectiveness of a roadway network. LOS assigns a rank (A - F) to road sections based on traffic flow and corresponding safe driving conditions. \n\nThe Highway Capacity Manual and AASHTO Geometric Design of Highways and Streets (\"Green Book\") list the following levels of service:\n A= Free flow \n B=Reasonably free flow \n C=Stable flow \n D=Approaching unstable flow \n E=Unstable flow \n F=Forced or breakdown flow\n\nThis dataset is used as a general reference layer for geographic information systems at the Washington State Department of Transportation, and is updated as needed. This service is maintained by the WSDOT Transportation Data and GIS Office. If you are having trouble viewing the service, please contact our Online Map Support at onlinemapsupport@wsdot.wa.gov.",
 "mapName": "Data Frame",
 "description": "WSDOT sets level of service (LOS) standards for state highways and ferry routes of statewide significance (HSS) based on RCW 47.06.140(2). Regional transportation planning organizations (RTPOs) and WSDOT jointly develop and RTPOs establish LOS standards for regionally significant state highways and ferry routes (non-HSS) based on RCW 47.80.030(1)(c). LOS is based on peak-hour except where noted.\n\nLevel of Service Standard is used by planners to determine the effectiveness of a roadway network. LOS assigns a rank (A - F) to road sections based on traffic flow and corresponding safe driving conditions. \n\nThe Highway Capacity Manual and AASHTO Geometric Design of Highways and Streets (\"Green Book\") list the following levels of service:\n A= Free flow \n B=Reasonably free flow \n C=Stable flow \n D=Approaching unstable flow \n E=Unstable flow \n F=Forced or breakdown flow\n\nThis dataset is used as a general reference layer for geographic information systems at the Washington State Department of Transportation, and is updated as needed. This service is maintained by the WSDOT Transportation Data and GIS Office. If you are having trouble viewing the service, please contact our Online Map Support at onlinemapsupport@wsdot.wa.gov.",
 "copyrightText": "",
 "supportsDynamicLayers": true,
 "layers": [
  {
   "id": 0,
   "name": "WSDOT Level of Service Standard - State Routes",
   "parentLayerId": -1,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 0,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolyline",
   "supportsDynamicLegends": true
  },
  {
   "id": 1,
   "name": "WSDOT Level of Service Standard - Ferry Routes",
   "parentLayerId": -1,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 0,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolyline",
   "supportsDynamicLegends": true
  }
 ],
 "tables": [],
 "spatialReference": {
  "wkid": 102100,
  "latestWkid": 3857,
  "xyTolerance": 0.001,
  "zTolerance": 0.001,
  "mTolerance": 0.001,
  "falseX": -20037700,
  "falseY": -30241100,
  "xyUnits": 10000,
  "falseZ": -100000,
  "zUnits": 10000,
  "falseM": -100000,
  "mUnits": 10000
 },
 "singleFusedMapCache": false,
 "initialExtent": {
  "xmin": -1.3931560905954706E7,
  "ymin": 5614655.765109135,
  "xmax": -1.2956130897686435E7,
  "ymax": 6319652.693491345,
  "spatialReference": {
   "wkid": 102100,
   "latestWkid": 3857,
   "xyTolerance": 0.001,
   "zTolerance": 0.001,
   "mTolerance": 0.001,
   "falseX": -20037700,
   "falseY": -30241100,
   "xyUnits": 10000,
   "falseZ": -100000,
   "zUnits": 10000,
   "falseM": -100000,
   "mUnits": 10000
  }
 },
 "fullExtent": {
  "xmin": -1.387875223719689E7,
  "ymin": 5701342.188338419,
  "xmax": -1.3008942891590819E7,
  "ymax": 6282109.988201317,
  "spatialReference": {
   "wkid": 102100,
   "latestWkid": 3857,
   "xyTolerance": 0.001,
   "zTolerance": 0.001,
   "mTolerance": 0.001,
   "falseX": -20037700,
   "falseY": -30241100,
   "xyUnits": 10000,
   "falseZ": -100000,
   "zUnits": 10000,
   "falseM": -100000,
   "mUnits": 10000
  }
 },
 "datesInUnknownTimezone": false,
 "minScale": 0,
 "maxScale": 0,
 "units": "esriMeters",
 "supportedImageFormatTypes": "PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP",
 "documentInfo": {
  "Title": "WSDOT - Level of Service Standard",
  "Author": "",
  "Comments": "WSDOT sets level of service (LOS) standards for state highways and ferry routes of statewide significance (HSS) based on RCW 47.06.140(2). Regional transportation planning organizations (RTPOs) and WSDOT jointly develop and RTPOs establish LOS standards for regionally significant state highways and ferry routes (non-HSS) based on RCW 47.80.030(1)(c). LOS is based on peak-hour except where noted.\n\nLevel of Service Standard is used by planners to determine the effectiveness of a roadway network. LOS assigns a rank (A - F) to road sections based on traffic flow and corresponding safe driving conditions. \n\nThe Highway Capacity Manual and AASHTO Geometric Design of Highways and Streets (\"Green Book\") list the following levels of service:\n A= Free flow \n B=Reasonably free flow \n C=Stable flow \n D=Approaching unstable flow \n E=Unstable flow \n F=Forced or breakdown flow\n\nThis dataset is used as a general reference layer for geographic information systems at the Washington State Department of Transportation, and is updated as needed. This service is maintained by the WSDOT Transportation Data and GIS Office. If you are having trouble viewing the service, please contact our Online Map Support at onlinemapsupport@wsdot.wa.gov.",
  "Subject": "Level of Service Standard for Washington State Routes and Ferry Routes operated by the State of Washington.",
  "Category": "",
  "Version": "2.9.0",
  "AntialiasingMode": "None",
  "TextAntialiasingMode": "None",
  "Keywords": "WA,Washington,WSDOT,Transportation,Level of Service"
 },
 "capabilities": "Map,Query,Data",
 "supportedQueryFormats": "JSON, geoJSON, PBF",
 "exportTilesAllowed": false,
 "referenceScale": 0.0,
 "datumTransformations": [
  {
   "geoTransforms": [
    {
     "wkid": 108282,
     "latestWkid": 108282,
     "transformForward": false,
     "name": "WGS_1984_(ITRF00)_To_NAD_1983_HARN"
    }
   ]
  }
 ],
 "supportsDatumTransformation": true,
 "archivingInfo": {"supportsHistoricMoment": false},
 "supportsClipping": true,
 "supportsSpatialFilter": true,
 "supportsTimeRelation": true,
 "supportsQueryDataElements": true,
 "mapUnits": {"uwkid": 9001},
 "maxRecordCount": 1000,
 "maxImageHeight": 4096,
 "maxImageWidth": 4096,
 "supportedExtensions": "FeatureServer, KmlServer, WMSServer",
 "resampling": false
}